🏠︎ / Products / LED Controllers / Xelee StripLED 4

Detailed description

The Xelee StripLED 4 controller is a professional DMX512 device with RDM (Remote Device Management) support, designed to control RGBW LEDs via four independent output channels corresponding to the colors red, green, blue, and white. Each channel is controlled independently, allowing for full control over the color and brightness of the light in RGBW installations.

Thanks to RDM, an installer can remotely read and configure the controller’s DMX address, verify its status, and diagnose any faults without physical access to the device—which significantly reduces installation and service time in systems consisting of multiple controllers.

The devices are connected in series (in a chain) using RJ45 connectors, with a maximum DMX line length of 300 meters and up to 32 devices in the chain. The last device in the chain must be terminated with a 120 Ω terminator between the Data+ and Data- lines, and a larger number of controllers requires the use of a DMX repeater or splitter.

The controller allows you to program up to 10 independent lighting scenes, which can be played back individually or as a sequence (show), with individually adjustable fade-in and hold times for each scene. If no DMX signal is received, the device can automatically switch to running its own demo program.

In installations consisting of multiple controllers, a single Xelee device can act as the master, transmitting the currently playing scene to the other units on the network—this ensures that all controllers operate identically without the need for an external DMX console, which can be useful in large decorative or architectural installations.

Configuration is performed using dedicated PC software. The program automatically detects connected devices and allows you to view their parameters—DMX address, label, temperature, and supply voltage.

The serial addressing feature automatically assigns sequential DMX addresses to multiple devices based on the number of their channels, and the settings copy option transfers advanced configurations from one controller to all others—significantly reducing the setup time for larger installations. An additional identification feature allows you to locate a physical device via a flashing LED on the controller.

The PWM frequency is adjustable within the range of 300–3,600 Hz, with higher frequencies reducing the visibility of light flicker (important when recording video with a camera or smartphone), but proportionally decreasing the maximum bit resolution of the control—from 16 bits at 300 Hz to 12 bits at 3,600 Hz.

The controller supports three control characteristics: linear, logarithmic (for white light), and gamma 2.0 (for colored light), which ensures smooth and precise brightness transitions regardless of the DMX resolution used in the installation.

The total power limit (constant power) function allows you to limit the total power of all channels to the power level of a single channel, which enables maximum drive on a single channel while limiting the thermal load and the power required from the power supply during multi-channel operation.

Built-in thermal protection safeguards the device against overheating during prolonged operation. Installation on a metal plate or other component with high thermal conductivity is recommended to improve the dissipation of heat generated during operation, especially when there is a large difference between the input and output voltages.

Technical parameters

Protocol: DMX512 with RDM support
Supported lighting type: RGBW LED, 4 independent channels (R, G, B, W)
Connectors: RJ45 (DMX IN/OUT), serial connection (daisy-chain)
Maximum DMX line length: 300 m
Maximum number of devices in a chain: 32
Supply voltage: 12–48 V DC
output current per channel: up to 3750 mA
electrical efficiency: up to 92%
control resolution: 13–16 bits (depending on PWM frequency)
PWM frequency: 300–3600 Hz
Ambient temperature range: -20…+40°C
Maximum housing temperature: 80°C
Standby current: up to 26 mA
Scene function: up to 10 independent scenes, played individually or in sequence
Multi-device synchronization: master/demo sync function
Control curves: linear, logarithmic (DALI), gamma 2.0
Configuration: Dedicated PC software—device detection, serial addressing,
setting copy, LED identification
Thermal protection
Wiring: wires with a cross-sectional area of 0.5–1.5 mm², insulation stripped to a length of 7 mm

Certificates and standards

CE certificate
compliance with the RoHS Directive

Files to download

Text Link

Xelee StripLED 4

LED Controllers

DMX512

The Xelee StripLED 4 DMX512 LED controller is a professional device with RDM protocol support, designed to control RGBW LEDs via four independent output channels. A single Xelee unit can act as a master and broadcast the same scene to other controllers on the network, allowing multiple units to operate without a constant connection to a DMX console. The controller offers a PWM frequency of up to 3,600 Hz, a control resolution of up to 16 bits, and configuration via dedicated PC software.

Find out more

Scroll down

If you have technical questions regarding adaptation, schedule a brief conversation with our engineer.

Free consultation

Stanisław Binkiewicz

CEO & CTO

The ability to mix colour temperatures in a single MOQ makes it easier for us to manage production.
Dedicated LED modules arrive efficiently, and adequate stock levels at ALSC prevent downtime during assembly. This is a concrete collaboration that allows us to maintain full process continuity.

Tomasz Lipka

Production Director at BEMKO GROUP

The use of wide-angle optics modules from ALSC allowed us to achieve perfectly even illumination across the entire surface of the luminaire and optimise production costs. The company manufactures modules according to individual designs, which in our case allowed us to embark on a new project.

I recommend working with ALSC.

Piotr Jedynak

Head of Production at BD-LUX Sp. z o.o.

We have been working with ALSC for 5 years. The company has supplied us with advanced LED modules for research and development projects.
For me, it is the best company of its kind in Europe.
The solutions proposed by ALSC often exceed our requirements, paving the way for true innovation in the technology we deal with at Nanosci.

Adam Kądziela

CEO&CO-FOUNDER at Nanosci Sp. z o.o.

Working with ALSC proved to be the right choice.

For our space project, we were looking for a company that could produce specific lighting modules with a solar colour.

We are very pleased that we were able to develop a solution that proved successful both in our experiment on the International Space Station and in the algae cultivation laboratory. A highly personalised approach to the customer and the ability to tailor lighting modules to specific needs.

We hope to continue our cooperation! I highly recommend them!

Ewa Borowska

CTO, Extremo Technologies.

We have been cooperating with ALSC for over a dozen years in the design and manufacture of electronics for traffic lights. We greatly value their expert technical advice and the high quality of each batch of goods.

They are a reliable partner who has guaranteed us complete stability and technological support for years.

Tomasz Górka

COO at Spinnea

We have been working with ALSC for 10 years and appreciate their rapid prototyping, on-time delivery and the fact that the modules are manufactured in Poland. We value ALSC for their colour consistency and professional approach to customers and their quality requirements.

They are a partner who truly understands the technological needs of lighting manufacturers.

Andrzej Wojciechowski

Head of Production at Awamed Medizintechnik

We have been working with ALSC for 7 years and consistently value their support in the production of our dedicated LED modules. They are a reliable partner who provides reliable technical support and very friendly, professional customer service.

We entrust them with the implementation of subsequent projects with complete confidence.

Robert Sarlej

CEO at Lumelin

As a Product Designer, I value ALSC because their electronics adapt to my ideas, not the other way around.

The engineering support I receive from them makes every bold design technically feasible.

Łukasz Jaworski

Product Designer at Nowodvorski Lighting Sp. z o.o.

Thanks to our cooperation with ALSC, we can be sure that we provide our customers with the highest quality lighting. We greatly appreciate the individual approach and specialist support.

Short supply chains and production in Europe are also a big plus for us, which is in line with our brand's principles.

Oskar Zięta

CEO ZIETA PROZESSDESIGN

Produkcja w 3 krokach

Tak wygląda proces współpracy z ALSC.

Etap 1

Etap 2

Etap 3

Weryfikacja założeń projektu i szybka wycena

Po wstępnej weryfikacji możliwości realizacji, ofertę na gotowe produkty otrzymasz w 24 godziny, a na dedykowane rozwiązania w maksymalnie 48 godzin.

Minimalna liczba zamówienia (MOQ) jest ustalana indywidualnie.

Przy pierwszej współpracy wymagamy przedpłaty 50%, a pozostałą część rozliczamy po dostawie zamówienia.

Szczegółowa Konsultacja Inżynierska

PM skontaktuje się telefonicznie w ciągu 24 godzin roboczych, aby zebrać kluczowe informacje i przygotować temat dla eksperta.

Nasz inżynier omawia i konkretyzuje założenia, weryfikując wykonalność techniczną i optymalny dobór komponentów.

Wspólnie ustalamy szczegóły, w tym warunki wykonania darmowego prototypu

Po pomyślnej konsultacji klient otrzymuje termin realizacji i szczegółowy harmonogram dostawy.

Moduł LED OEM, raport i 5 lat gwarancji

Po zatwierdzeniu prototypu rozpoczynamy produkcję Twojego zamówienia w Polsce.

Każda partia przechodzi testy elektryczne, w tym pomiary fotometryczne kluczowych parametrów świetlnych.

Produkt pakujemy w biodegradowalne opakowania drukowane 3D, dołączając pełny raport z pomiarów oraz 5-letnią gwarancję.

Cały proces realizacji dedykowanego zamówienia seryjnego to 4 tygodnie.

Bezpłatna konsultacja

3 steps to a customised offer

See how the LED module pricing and ordering process works

Stage 1

Stage 2

Stage 3

You fill in the contact form

Click on the red button labelled ‘Consult LED module selection’, leave your details and indicate the product you are interested in.

This is a signal for us to prepare for a discussion about a specific solution from our offer.

You can also contact us by telephone or send your enquiry directly to logistyka@alsc.pl.

Technical consultation with an engineer

We will contact you by phone or email within 24 working hours to discuss the details of the project. You will talk to the engineers who design these LED modules.

We will ask you about the type of application and power supply to ensure that the product will work stably in your device.

If technical issues need to be clarified, we will work them out together. The conversation serves to confirm that the component fits your requirements.

PDF offer and implementation

Once we have confirmed all the details, you will receive a concise offer from us in PDF format. The document contains product codes, prices and the expected delivery time.

All information is presented in a clear and concise manner, making it easier for you to make a decision. Once you have accepted and agreed to the terms and conditions, the order is sent to our production facility for fulfilment.

We know how important it is to provide a quote quickly, which is why it takes a maximum of 2 working days from the moment you send your enquiry to receive a quote.

We will select the optimal LED modules for your application.

Consult the selection of LED modules

Over 20 years of experience

Are you unsure? Do not take any risks and consult the ALSC technical department about this product.

This will not be a sales pitch.
We will contact you for a brief, no-obligation consultation to determine whether we can help your company.

Our Project Manager will initially discuss your needs and then refer the matter to an engineer for consultation.

However, if you prefer a face-to-face meeting rather than an online consultation, we invite you to visit our headquarters near Wrocław.

ALSC Sp. z o.o.
Ul. Władysława Grabskiego 22
55-011 Siechnice, Polska
NIP 8961609048
REGON: 520690120

+48 575 240 004

logistyka@alsc.pl

Kamil Żala

Owner of Stolarnia Pika S.C.

We install ALSC's round AC LED ceiling lights directly into wood without the need for external power supplies. It is a ready-made solution that has significantly improved our entire production process. We are satisfied with the quality of their LED modules.

Customised appearance

OEM of LED modules and controllers

We offer full customisation: adjustment of shape, CCT, CRI, and printing of the customer's logo on the manufactured LED module. We help manufacturers make their light sources an integral part of their brand, enhancing the prestige and uniqueness of your end product.

Consult a non-standard product

Photo from the ALSC production line

Warranty

5-year warranty and post-warranty support

LED technology is mature and stable, which is why precision is key. Our 20 years of experience in electronics design guarantees reliability. We are confident in the quality of our light sources, which is why we offer a 5-year warranty and post-warranty service.

Free consultation

Frequently asked questions

Find answers to your questions

Get in touch

Today at 5:39

What is a Driver on Board (DOB) LED module and what are its advantages over a CC/CV module?

The Driver on Board (DOB) module has a built-in driver on the PCB and is powered directly from the 230V AC mains, without the need for an external LED power supply. This eliminates the need for an additional purchase and an extra component to be fitted in the luminaire, reducing the total cost of materials and the problem of finding space for the power supply within the housing.

Do DOB LED modules exhibit more light flickering than modules with a separate power supply?

Simpler DOB architectures may be more prone to light flickering; however, the J40R1 module maintains flickering indices (SVM <0.9, Pst LM <1) at a level that ensures visual comfort comparable to that of modules powered by a dedicated LED power supply.

Does the J40R1 LED module require an additional holder and optics?

No — the DOB module operates independently; however, ALSC offers an optional 3D-printed holder that integrates the module with the optics, available as a separately sold accessory for customers who do not wish to design their own optical mounting.