🏠︎ / Products / Linear LED Modules / LinAC 500×40 mm 2200 lm

Detailed description

The LinAC 500×40 mm linear LED module has been designed to simplify the construction of lighting fixtures by eliminating external power supply components.

The control system has been integrated directly onto the PCB (Driver on Board), allowing the module to be connected directly to a 230V AC mains supply.

This solution reduces prefabrication time and lowers the total cost of lighting production.

The product is characterised by high electrical parameters, including a power factor of 0.99 and limited light ripple (SVM < 0.9, PstLM < 1).

On request, this linear LED module can be supplied with thermal tape applied, which allows for permanent mounting in the luminaire housing without the need for drilling holes.

A robust 1.6 mm thick PCB laminate ensures mechanical and thermal stability, supporting an L70B50 lifetime of over 102,000 hours.

Technical parameters

LED module length: 500 mm.
LED module width: 40 mm.
Luminous efficacy: up to 165 lm/W at an operating temperature of 25 °C.
Power supply type: direct 230V AC mains with Driver on Board technology.
Colour rendering index: CRI 80 or CRI 90.
Power factor: >0.99.
L70B50 lifetime: over 102,000 hours.
L-N surge protection: 2 kV.
Plug connectors: supports cables with a cross-section of 0.2 mm² to 0.75 mm².
Recommended cable stripping length: 7 mm – 9 mm.

Certificates and standards

CE certificate and full compliance with the RoHS directive.
Classification according to IEC 62031: Built-in module.
Photobiological safety: Risk group RG1 according to IEC 62471.
Energy class: C or D depending on the selected version.
Degree of protection: IP00.
Compliance with the requirements for protection class I luminaires (earthing mandatory).
Can be used in protection class II luminaires while maintaining the appropriate safety standards.

Files to download

Datasheet: LED Module Linear-LinAC-500x40-mm-CRI-80.90-2200-lm-13-W-4C-V5

LinAC 500×40 mm 2200 lm

Linear LED Modules

AC 230V (DOB)

The LinAC 500x40 mm linear LED module is an integrated light source powered directly by 230V AC. Thanks to Driver on Board technology, the module eliminates the need for an external power supply, offering a luminous flux of up to 2230 lm and an efficiency of up to 165 lm/W. The compact design and the possibility of factory-applied thermal tape allow for quick installation without the use of screws.

Find out more

Scroll down

If you have technical questions regarding adaptation, schedule a brief conversation with our engineer.

Free consultation

Stanisław Binkiewicz

CEO & CTO

Product variants

Filter

Swipe sideways to see all parameters.

Variant name

Technical variant

Photometric code

Usefull luminous flux (lm)

Expected luminous flux (lm)

Forward current (mA)

Min. forward voltage (V)

Max. forward voltage (V)

Power consumption (W)

Efficacy (lm/W)

Expected efficacy (lm/W)

Dimensions (mm)

Energy classification

J5040L96-830-14-V5

LinAC CRI 80 V5

830/359

2210

2180

158

156

J5040L96-840-13-V5

LinAC CRI 80 V5

840/359

2230

2200

13.5

165

163

The ability to mix colour temperatures in a single MOQ makes it easier for us to manage production.
Dedicated LED modules arrive efficiently, and adequate stock levels at ALSC prevent downtime during assembly. This is a concrete collaboration that allows us to maintain full process continuity.

Tomasz Lipka

Production Director at BEMKO GROUP

The use of wide-angle optics modules from ALSC allowed us to achieve perfectly even illumination across the entire surface of the luminaire and optimise production costs. The company manufactures modules according to individual designs, which in our case allowed us to embark on a new project.

I recommend working with ALSC.

Piotr Jedynak

Head of Production at BD-LUX Sp. z o.o.

We have been working with ALSC for 5 years. The company has supplied us with advanced LED modules for research and development projects.
For me, it is the best company of its kind in Europe.
The solutions proposed by ALSC often exceed our requirements, paving the way for true innovation in the technology we deal with at Nanosci.

Adam Kądziela

CEO&CO-FOUNDER at Nanosci Sp. z o.o.

Working with ALSC proved to be the right choice.

For our space project, we were looking for a company that could produce specific lighting modules with a solar colour.

We are very pleased that we were able to develop a solution that proved successful both in our experiment on the International Space Station and in the algae cultivation laboratory. A highly personalised approach to the customer and the ability to tailor lighting modules to specific needs.

We hope to continue our cooperation! I highly recommend them!

Ewa Borowska

CTO, Extremo Technologies.

We have been cooperating with ALSC for over a dozen years in the design and manufacture of electronics for traffic lights. We greatly value their expert technical advice and the high quality of each batch of goods.

They are a reliable partner who has guaranteed us complete stability and technological support for years.

Tomasz Górka

COO at Spinnea

We have been working with ALSC for 10 years and appreciate their rapid prototyping, on-time delivery and the fact that the modules are manufactured in Poland. We value ALSC for their colour consistency and professional approach to customers and their quality requirements.

They are a partner who truly understands the technological needs of lighting manufacturers.

Andrzej Wojciechowski

Head of Production at Awamed Medizintechnik

We have been working with ALSC for 7 years and consistently value their support in the production of our dedicated LED modules. They are a reliable partner who provides reliable technical support and very friendly, professional customer service.

We entrust them with the implementation of subsequent projects with complete confidence.

Robert Sarlej

CEO at Lumelin

As a Product Designer, I value ALSC because their electronics adapt to my ideas, not the other way around.

The engineering support I receive from them makes every bold design technically feasible.

Łukasz Jaworski

Product Designer at Nowodvorski Lighting Sp. z o.o.

Thanks to our cooperation with ALSC, we can be sure that we provide our customers with the highest quality lighting. We greatly appreciate the individual approach and specialist support.

Short supply chains and production in Europe are also a big plus for us, which is in line with our brand's principles.

Oskar Zięta

CEO ZIETA PROZESSDESIGN

Produkcja w 3 krokach

Tak wygląda proces współpracy z ALSC.

Etap 1

Etap 2

Etap 3

Weryfikacja założeń projektu i szybka wycena

Po wstępnej weryfikacji możliwości realizacji, ofertę na gotowe produkty otrzymasz w 24 godziny, a na dedykowane rozwiązania w maksymalnie 48 godzin.

Minimalna liczba zamówienia (MOQ) jest ustalana indywidualnie.

Przy pierwszej współpracy wymagamy przedpłaty 50%, a pozostałą część rozliczamy po dostawie zamówienia.

Szczegółowa Konsultacja Inżynierska

PM skontaktuje się telefonicznie w ciągu 24 godzin roboczych, aby zebrać kluczowe informacje i przygotować temat dla eksperta.

Nasz inżynier omawia i konkretyzuje założenia, weryfikując wykonalność techniczną i optymalny dobór komponentów.

Wspólnie ustalamy szczegóły, w tym warunki wykonania darmowego prototypu

Po pomyślnej konsultacji klient otrzymuje termin realizacji i szczegółowy harmonogram dostawy.

Moduł LED OEM, raport i 5 lat gwarancji

Po zatwierdzeniu prototypu rozpoczynamy produkcję Twojego zamówienia w Polsce.

Każda partia przechodzi testy elektryczne, w tym pomiary fotometryczne kluczowych parametrów świetlnych.

Produkt pakujemy w biodegradowalne opakowania drukowane 3D, dołączając pełny raport z pomiarów oraz 5-letnią gwarancję.

Cały proces realizacji dedykowanego zamówienia seryjnego to 4 tygodnie.

Bezpłatna konsultacja

3 steps to a customised offer

See how the LED module pricing and ordering process works

Stage 1

Stage 2

Stage 3

You fill in the contact form

Click on the red button labelled ‘Consult LED module selection’, leave your details and indicate the product you are interested in.

This is a signal for us to prepare for a discussion about a specific solution from our offer.

You can also contact us by telephone or send your enquiry directly to logistyka@alsc.pl.

Technical consultation with an engineer

We will contact you by phone or email within 24 working hours to discuss the details of the project. You will talk to the engineers who design these LED modules.

We will ask you about the type of application and power supply to ensure that the product will work stably in your device.

If technical issues need to be clarified, we will work them out together. The conversation serves to confirm that the component fits your requirements.

PDF offer and implementation

Once we have confirmed all the details, you will receive a concise offer from us in PDF format. The document contains product codes, prices and the expected delivery time.

All information is presented in a clear and concise manner, making it easier for you to make a decision. Once you have accepted and agreed to the terms and conditions, the order is sent to our production facility for fulfilment.

We know how important it is to provide a quote quickly, which is why it takes a maximum of 2 working days from the moment you send your enquiry to receive a quote.

We will select the optimal LED modules for your application.

Consult the selection of LED modules

Over 20 years of experience

Are you unsure? Do not take any risks and consult the ALSC technical department about this product.

This will not be a sales pitch.
We will contact you for a brief, no-obligation consultation to determine whether we can help your company.

Our Project Manager will initially discuss your needs and then refer the matter to an engineer for consultation.

However, if you prefer a face-to-face meeting rather than an online consultation, we invite you to visit our headquarters near Wrocław.

ALSC Sp. z o.o.
Ul. Władysława Grabskiego 22
55-011 Siechnice, Polska
NIP 8961609048
REGON: 520690120

+48 575 240 004

logistyka@alsc.pl

Kamil Żala

Owner of Stolarnia Pika S.C.

We install ALSC's round AC LED ceiling lights directly into wood without the need for external power supplies. It is a ready-made solution that has significantly improved our entire production process. We are satisfied with the quality of their LED modules.

Customised appearance

OEM of LED modules and controllers

We offer full customisation: adjustment of shape, CCT, CRI, and printing of the customer's logo on the manufactured LED module. We help manufacturers make their light sources an integral part of their brand, enhancing the prestige and uniqueness of your end product.

Consult a non-standard product

Photo from the ALSC production line

Warranty

5-year warranty and post-warranty support

LED technology is mature and stable, which is why precision is key. Our 20 years of experience in electronics design guarantees reliability. We are confident in the quality of our light sources, which is why we offer a 5-year warranty and post-warranty service.

Free consultation

Frequently asked questions

Find answers to your questions

Get in touch

Today at 17:49

Why is the A5616L8 LED module a better and cheaper alternative to ready-made LED panels and ceiling lights?

The A5616L8 1100lm LED module is the key to optimising the cost of your luminaire. It is a much cheaper alternative, offering savings of up to 50% compared to ready-made LED panels and ceiling lights. We guarantee its versatility thanks to the possibility of precise cutting every 70mm. In addition, this dedicated LED module provides high efficiency of up to 191 lm/W (for CRI80).

Where and under what conditions do you manufacture LED modules, and do you have your own technical facilities?

ALSC is a Polish manufacturer of LED modules and has its own SMT and THT assembly line. A specialised measurement laboratory ensures control over every stage of the process. It is there, in the integrating sphere, that we verify key optical parameters: luminous flux (lumens), CCT, CRI and McAdam SDCM.

Does the OEM service only apply to your own designs, or can you create an LED module from scratch?

The OEM service applies to both scenarios. As ALSC – a Polish manufacturer of LED modules with our own design office and SMT/THT assembly line – we can adapt our wide range of proprietary light sources, but also create a completely new LED module from scratch at the customer's request.

Customers who were interested in this product also checked out...

Products

Linear LED Modules LED Panels LED Controllers Power Supplies

Website

About us Our Projects Contact Free Prototype Privacy policy

Design: Proformat